Purpose

The SHINNY Task for Referral Management Profile is profiled off of the Gravity SDOH Clinical Care Task for Referral Management profile. It sets minimum expectations for the Task resource and identifies which core elements, extensions, vocabularies and value sets SHALL be present in the resource when using this profile.

Usage

The Task for Referral Managemnt profile is required only after the referral is completed. However, it can be included in bundles prior to completion (see appropriate timestemp and task status management below).

Timestamp and Task Status Management

Several statuses can be selected throughout the progression of a task and each is associated with a specific timestamp. Below specific timestamps are mapped to the relevant task statuses.

• Requested: Task.executionPeriod.start
• Accepted: Task.lastModified
• In Progress: Task.lastModified
• Rejected: Task.executionPeriod.end
• Complete: Task.executionPeriod.end

• Key Elements Table
• Differential Table
• Snapshot Table
• Statistics/References
• All

Name	Flags	Card.	Type	Description & Constraints
Task	C	0..*	SDOHCCTaskForReferralManagement	A request to fulfill an SDOH service request dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated dom-5: If a resource is contained in another resource, it SHALL NOT have a security label dom-6: A resource should have narrative for robust management inv-1: Last modified date must be greater than or equal to authored-on date.
id	SΣ	1..1	id	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
meta	SΣ	1..1	SHINNYMeta	Metadata about the resource ele-1: All FHIR elements must have a @value or children
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created ele-1: All FHIR elements must have a @value or children
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
Slices for partOf	Σ	0..*	Reference(Task)	Composite task Slice: Unordered, Open by profile:resolve() ele-1: All FHIR elements must have a @value or children
partOf:SupportedPartOf	SΣ	0..*	Reference(SDOHCC Task For Referral Management)	Composite task ele-1: All FHIR elements must have a @value or children
status	?!SΣ	1..1	code	draft | requested | received | accepted | + Binding: SDOHCC ValueSet Referral Task Status (required) ele-1: All FHIR elements must have a @value or children
statusReason	SΣ	0..1	CodeableConcept	Reason for current status Binding: SHINNYStatusReasonVS (extensible) ele-1: All FHIR elements must have a @value or children
text	SΣ	1..1	string	Plain text representation of the concept ele-1: All FHIR elements must have a @value or children
intent	Σ	1..1	code	order Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order. ele-1: All FHIR elements must have a @value or children Fixed Value: order
priority	S	0..1	code	routine | urgent | asap | stat Binding: RequestPriority (required): The task's priority. ele-1: All FHIR elements must have a @value or children
code	Σ	1..1	CodeableConcept	Task Type Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/CodeSystem/task-code
code		1..1	code	Symbol in syntax defined by the system Fixed Value: fulfill
focus	SΣ	1..1	Reference(SDOHCC ServiceRequest)	What task is acting on ele-1: All FHIR elements must have a @value or children
for	SΣ	1..1	Reference(RelatedPerson | Group | US Core Patient Profile)	Beneficiary of the Task ele-1: All FHIR elements must have a @value or children
encounter	SΣ	1..1	Reference(Encounter)	Healthcare event during which this task originated ele-1: All FHIR elements must have a @value or children
authoredOn	SC	1..1	dateTime	Task Creation Date ele-1: All FHIR elements must have a @value or children
requester	SΣ	1..1	Reference(US Core PractitionerRole Profile | US Core Organization Profile)	Who is asking for task to be done ele-1: All FHIR elements must have a @value or children
owner	SΣ	1..1	Reference(Practitioner | PractitionerRole | Organization | CareTeam | HealthcareService | Patient | Device | RelatedPerson)	Responsible individual ele-1: All FHIR elements must have a @value or children
Slices for output		0..*	BackboneElement	Information produced as part of task Slice: Unordered, Open by pattern:type, type:value ele-1: All FHIR elements must have a @value or children
output:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. ele-1: All FHIR elements must have a @value or children
value[x]		1..1		Result of output ele-1: All FHIR elements must have a @value or children
valueBase64Binary			base64Binary
valueBoolean			boolean
valueCanonical			canonical(Any)
valueCode			code
valueDate			date
valueDateTime			dateTime
valueDecimal			decimal
valueId			id
valueInstant			instant
valueInteger			integer
valueMarkdown			markdown
valueOid			oid
valuePositiveInt			positiveInt
valueString			string
valueTime			time
valueUnsignedInt			unsignedInt
valueUri			uri
valueUrl			url
valueUuid			uuid
valueAddress			Address
valueAge			Age
valueAnnotation			Annotation
valueAttachment			Attachment
valueCodeableConcept			CodeableConcept
valueCoding			Coding
valueContactPoint			ContactPoint
valueCount			Count
valueDistance			Distance
valueDuration			Duration
valueHumanName			HumanName
valueIdentifier			Identifier
valueMoney			Money
valuePeriod			Period
valueQuantity			Quantity
valueRange			Range
valueRatio			Ratio
valueReference			Reference(Any)
valueSampledData			SampledData
valueSignature			Signature
valueTiming			Timing
valueContactDetail			ContactDetail
valueContributor			Contributor
valueDataRequirement			DataRequirement
valueExpression			Expression
valueParameterDefinition			ParameterDefinition
valueRelatedArtifact			RelatedArtifact
valueTriggerDefinition			TriggerDefinition
valueUsageContext			UsageContext
valueDosage			Dosage
valueMeta			Meta
output:PerformedActivityReference	S	0..*	BackboneElement	Information produced as part of task ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
Slices for value[x]		1..1	Reference()	Result of output Slice: Unordered, Closed by type:$this ele-1: All FHIR elements must have a @value or children
value[x]:valueReference	S	1..1	Reference(SDOHCC Procedure)	Result of output ele-1: All FHIR elements must have a @value or children
output:PerformedActivityCode	S	0..*	BackboneElement	Information produced as part of task ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
Slices for value[x]		1..1	CodeableConcept	Result of output Slice: Unordered, Closed by type:$this ele-1: All FHIR elements must have a @value or children
value[x]:valueCodeableConcept	S	1..1	CodeableConcept	Result of output Binding: US Core Procedure Codes (required) ele-1: All FHIR elements must have a @value or children
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Task.status	required	SDOHCCValueSetReferralTaskStatus http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetReferralTaskStatus
Task.statusReason	extensible	SHINNYStatusReasonVS http://shinny.org/us/ny/hrsn/ValueSet/SHINNYStatusReasonVS from this IG
Task.intent	required	Fixed Value: order http://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard
Task.priority	required	RequestPriority http://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard
Task.code	example	Pattern: fulfill http://hl7.org/fhir/ValueSet/task-code from the FHIR Standard
Task.output.type	example
Task.output:PerformedActivityReference.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.value[x]:valueCodeableConcept	required	USCoreProcedureCodes http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Task	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Task	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Task	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Task	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Task	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
inv-1	error	Task	Last modified date must be greater than or equal to authored-on date. : lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn

This structure is derived from SDOHCCTaskForReferralManagement

Name	Flags	Card.	Type	Description & Constraints
Task		0..*	SDOHCCTaskForReferralManagement	A request to fulfill an SDOH service request
id	S	1..1	id	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
meta	S	1..1	SHINNYMeta	Metadata about the resource
statusReason		0..1	CodeableConcept	Reason for current status Binding: SHINNYStatusReasonVS (extensible)
encounter	S	1..1	Reference(Encounter)	Healthcare event during which this task originated
owner		1..1	Reference(Practitioner | PractitionerRole | Organization | CareTeam | HealthcareService | Patient | Device | RelatedPerson)	Responsible individual
Documentation for this format

Terminology Bindings (Differential)

Path	Conformance	ValueSet	URI
Task.statusReason	extensible	SHINNYStatusReasonVS http://shinny.org/us/ny/hrsn/ValueSet/SHINNYStatusReasonVS from this IG

Name	Flags	Card.	Type	Description & Constraints
Task	C	0..*	SDOHCCTaskForReferralManagement	A request to fulfill an SDOH service request inv-1: Last modified date must be greater than or equal to authored-on date.
id	SΣ	1..1	id	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
meta	SΣ	1..1	SHINNYMeta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier		0..*	Identifier	Task Instance Identifier
instantiatesCanonical	Σ	0..1	canonical(ActivityDefinition)	Formal definition of task
instantiatesUri	Σ	0..1	uri	Formal definition of task
basedOn	Σ	0..*	Reference(Resource)	Request fulfilled by this task
groupIdentifier	Σ	0..1	Identifier	Requisition or grouper id
Slices for partOf	Σ	0..*	Reference(Task)	Composite task Slice: Unordered, Open by profile:resolve()
partOf:SupportedPartOf	SΣ	0..*	Reference(SDOHCC Task For Referral Management)	Composite task
status	?!SΣ	1..1	code	draft | requested | received | accepted | + Binding: SDOHCC ValueSet Referral Task Status (required)
statusReason	SΣ	0..1	CodeableConcept	Reason for current status Binding: SHINNYStatusReasonVS (extensible)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system
text	SΣ	1..1	string	Plain text representation of the concept
businessStatus	Σ	0..1	CodeableConcept	E.g. "Specimen collected", "IV prepped" Binding Description (No ValueSet): (example): The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.
intent	Σ	1..1	code	order Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order. Fixed Value: order
priority	S	0..1	code	routine | urgent | asap | stat Binding: RequestPriority (required): The task's priority.
code	Σ	1..1	CodeableConcept	Task Type Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/CodeSystem/task-code
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: fulfill
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
description	Σ	0..1	string	Human-readable explanation of task
focus	SΣ	1..1	Reference(SDOHCC ServiceRequest)	What task is acting on
for	SΣ	1..1	Reference(RelatedPerson | Group | US Core Patient Profile)	Beneficiary of the Task
encounter	SΣ	1..1	Reference(Encounter)	Healthcare event during which this task originated
executionPeriod	Σ	0..1	Period	Start and end time of execution
authoredOn	SC	1..1	dateTime	Task Creation Date
lastModified	ΣC	0..1	dateTime	Task Last Modified Date
requester	SΣ	1..1	Reference(US Core PractitionerRole Profile | US Core Organization Profile)	Who is asking for task to be done
performerType		0..*	CodeableConcept	Requested performer Binding: ProcedurePerformerRoleCodes (preferred): The type(s) of task performers allowed.
owner	SΣ	1..1	Reference(Practitioner | PractitionerRole | Organization | CareTeam | HealthcareService | Patient | Device | RelatedPerson)	Responsible individual
location	Σ	0..1	Reference(Location)	Where task occurs
reasonCode		0..1	CodeableConcept	Why task is needed Binding Description (No ValueSet): (example): Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.
reasonReference		0..1	Reference(Resource)	Why task is needed
insurance		0..*	Reference(Coverage | ClaimResponse)	Associated insurance coverage
note		0..*	Annotation	Comments made about the task
relevantHistory		0..*	Reference(Provenance)	Key events in history of the Task
restriction		0..1	BackboneElement	Constraints on fulfillment tasks
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
repetitions		0..1	positiveInt	How many times to repeat
period		0..1	Period	When fulfillment sought
recipient		0..*	Reference(Patient | Practitioner | PractitionerRole | RelatedPerson | Group | Organization)	For whom is fulfillment sought?
input		0..*	BackboneElement	Information used to perform task
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for the input Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
value[x]		1..1		Content to use in performing the task
valueBase64Binary			base64Binary
valueBoolean			boolean
valueCanonical			canonical(Any)
valueCode			code
valueDate			date
valueDateTime			dateTime
valueDecimal			decimal
valueId			id
valueInstant			instant
valueInteger			integer
valueMarkdown			markdown
valueOid			oid
valuePositiveInt			positiveInt
valueString			string
valueTime			time
valueUnsignedInt			unsignedInt
valueUri			uri
valueUrl			url
valueUuid			uuid
valueAddress			Address
valueAge			Age
valueAnnotation			Annotation
valueAttachment			Attachment
valueCodeableConcept			CodeableConcept
valueCoding			Coding
valueContactPoint			ContactPoint
valueCount			Count
valueDistance			Distance
valueDuration			Duration
valueHumanName			HumanName
valueIdentifier			Identifier
valueMoney			Money
valuePeriod			Period
valueQuantity			Quantity
valueRange			Range
valueRatio			Ratio
valueReference			Reference(Any)
valueSampledData			SampledData
valueSignature			Signature
valueTiming			Timing
valueContactDetail			ContactDetail
valueContributor			Contributor
valueDataRequirement			DataRequirement
valueExpression			Expression
valueParameterDefinition			ParameterDefinition
valueRelatedArtifact			RelatedArtifact
valueTriggerDefinition			TriggerDefinition
valueUsageContext			UsageContext
valueDosage			Dosage
valueMeta			Meta
Slices for output		0..*	BackboneElement	Information produced as part of task Slice: Unordered, Open by pattern:type, type:value
output:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
value[x]		1..1		Result of output
valueBase64Binary			base64Binary
valueBoolean			boolean
valueCanonical			canonical(Any)
valueCode			code
valueDate			date
valueDateTime			dateTime
valueDecimal			decimal
valueId			id
valueInstant			instant
valueInteger			integer
valueMarkdown			markdown
valueOid			oid
valuePositiveInt			positiveInt
valueString			string
valueTime			time
valueUnsignedInt			unsignedInt
valueUri			uri
valueUrl			url
valueUuid			uuid
valueAddress			Address
valueAge			Age
valueAnnotation			Annotation
valueAttachment			Attachment
valueCodeableConcept			CodeableConcept
valueCoding			Coding
valueContactPoint			ContactPoint
valueCount			Count
valueDistance			Distance
valueDuration			Duration
valueHumanName			HumanName
valueIdentifier			Identifier
valueMoney			Money
valuePeriod			Period
valueQuantity			Quantity
valueRange			Range
valueRatio			Ratio
valueReference			Reference(Any)
valueSampledData			SampledData
valueSignature			Signature
valueTiming			Timing
valueContactDetail			ContactDetail
valueContributor			Contributor
valueDataRequirement			DataRequirement
valueExpression			Expression
valueParameterDefinition			ParameterDefinition
valueRelatedArtifact			RelatedArtifact
valueTriggerDefinition			TriggerDefinition
valueUsageContext			UsageContext
valueDosage			Dosage
valueMeta			Meta
output:PerformedActivityReference	S	0..*	BackboneElement	Information produced as part of task
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]		1..1	Reference()	Result of output Slice: Unordered, Closed by type:$this
value[x]:valueReference	S	1..1	Reference(SDOHCC Procedure)	Result of output
output:PerformedActivityCode	S	0..*	BackboneElement	Information produced as part of task
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]		1..1	CodeableConcept	Result of output Slice: Unordered, Closed by type:$this
value[x]:valueCodeableConcept	S	1..1	CodeableConcept	Result of output Binding: US Core Procedure Codes (required)
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Task.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages from the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Task.status	required	SDOHCCValueSetReferralTaskStatus http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetReferralTaskStatus
Task.statusReason	extensible	SHINNYStatusReasonVS http://shinny.org/us/ny/hrsn/ValueSet/SHINNYStatusReasonVS from this IG
Task.businessStatus	example
Task.intent	required	Fixed Value: order http://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard
Task.priority	required	RequestPriority http://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard
Task.code	example	Pattern: fulfill http://hl7.org/fhir/ValueSet/task-code from the FHIR Standard
Task.performerType	preferred	ProcedurePerformerRoleCodes http://hl7.org/fhir/ValueSet/performer-role from the FHIR Standard
Task.reasonCode	example
Task.input.type	example
Task.output.type	example
Task.output:PerformedActivityReference.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.value[x]:valueCodeableConcept	required	USCoreProcedureCodes http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Task	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Task	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Task	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Task	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Task	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
inv-1	error	Task	Last modified date must be greater than or equal to authored-on date. : lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn

Key Elements View

Name	Flags	Card.	Type	Description & Constraints
Task	C	0..*	SDOHCCTaskForReferralManagement	A request to fulfill an SDOH service request dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated dom-5: If a resource is contained in another resource, it SHALL NOT have a security label dom-6: A resource should have narrative for robust management inv-1: Last modified date must be greater than or equal to authored-on date.
id	SΣ	1..1	id	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
meta	SΣ	1..1	SHINNYMeta	Metadata about the resource ele-1: All FHIR elements must have a @value or children
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created ele-1: All FHIR elements must have a @value or children
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
Slices for partOf	Σ	0..*	Reference(Task)	Composite task Slice: Unordered, Open by profile:resolve() ele-1: All FHIR elements must have a @value or children
partOf:SupportedPartOf	SΣ	0..*	Reference(SDOHCC Task For Referral Management)	Composite task ele-1: All FHIR elements must have a @value or children
status	?!SΣ	1..1	code	draft | requested | received | accepted | + Binding: SDOHCC ValueSet Referral Task Status (required) ele-1: All FHIR elements must have a @value or children
statusReason	SΣ	0..1	CodeableConcept	Reason for current status Binding: SHINNYStatusReasonVS (extensible) ele-1: All FHIR elements must have a @value or children
text	SΣ	1..1	string	Plain text representation of the concept ele-1: All FHIR elements must have a @value or children
intent	Σ	1..1	code	order Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order. ele-1: All FHIR elements must have a @value or children Fixed Value: order
priority	S	0..1	code	routine | urgent | asap | stat Binding: RequestPriority (required): The task's priority. ele-1: All FHIR elements must have a @value or children
code	Σ	1..1	CodeableConcept	Task Type Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/CodeSystem/task-code
code		1..1	code	Symbol in syntax defined by the system Fixed Value: fulfill
focus	SΣ	1..1	Reference(SDOHCC ServiceRequest)	What task is acting on ele-1: All FHIR elements must have a @value or children
for	SΣ	1..1	Reference(RelatedPerson | Group | US Core Patient Profile)	Beneficiary of the Task ele-1: All FHIR elements must have a @value or children
encounter	SΣ	1..1	Reference(Encounter)	Healthcare event during which this task originated ele-1: All FHIR elements must have a @value or children
authoredOn	SC	1..1	dateTime	Task Creation Date ele-1: All FHIR elements must have a @value or children
requester	SΣ	1..1	Reference(US Core PractitionerRole Profile | US Core Organization Profile)	Who is asking for task to be done ele-1: All FHIR elements must have a @value or children
owner	SΣ	1..1	Reference(Practitioner | PractitionerRole | Organization | CareTeam | HealthcareService | Patient | Device | RelatedPerson)	Responsible individual ele-1: All FHIR elements must have a @value or children
Slices for output		0..*	BackboneElement	Information produced as part of task Slice: Unordered, Open by pattern:type, type:value ele-1: All FHIR elements must have a @value or children
output:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. ele-1: All FHIR elements must have a @value or children
value[x]		1..1		Result of output ele-1: All FHIR elements must have a @value or children
valueBase64Binary			base64Binary
valueBoolean			boolean
valueCanonical			canonical(Any)
valueCode			code
valueDate			date
valueDateTime			dateTime
valueDecimal			decimal
valueId			id
valueInstant			instant
valueInteger			integer
valueMarkdown			markdown
valueOid			oid
valuePositiveInt			positiveInt
valueString			string
valueTime			time
valueUnsignedInt			unsignedInt
valueUri			uri
valueUrl			url
valueUuid			uuid
valueAddress			Address
valueAge			Age
valueAnnotation			Annotation
valueAttachment			Attachment
valueCodeableConcept			CodeableConcept
valueCoding			Coding
valueContactPoint			ContactPoint
valueCount			Count
valueDistance			Distance
valueDuration			Duration
valueHumanName			HumanName
valueIdentifier			Identifier
valueMoney			Money
valuePeriod			Period
valueQuantity			Quantity
valueRange			Range
valueRatio			Ratio
valueReference			Reference(Any)
valueSampledData			SampledData
valueSignature			Signature
valueTiming			Timing
valueContactDetail			ContactDetail
valueContributor			Contributor
valueDataRequirement			DataRequirement
valueExpression			Expression
valueParameterDefinition			ParameterDefinition
valueRelatedArtifact			RelatedArtifact
valueTriggerDefinition			TriggerDefinition
valueUsageContext			UsageContext
valueDosage			Dosage
valueMeta			Meta
output:PerformedActivityReference	S	0..*	BackboneElement	Information produced as part of task ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
Slices for value[x]		1..1	Reference()	Result of output Slice: Unordered, Closed by type:$this ele-1: All FHIR elements must have a @value or children
value[x]:valueReference	S	1..1	Reference(SDOHCC Procedure)	Result of output ele-1: All FHIR elements must have a @value or children
output:PerformedActivityCode	S	0..*	BackboneElement	Information produced as part of task ele-1: All FHIR elements must have a @value or children
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized ele-1: All FHIR elements must have a @value or children ext-1: Must have either extensions or value[x], not both
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. ele-1: All FHIR elements must have a @value or children Required Pattern: At least the following
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
Slices for value[x]		1..1	CodeableConcept	Result of output Slice: Unordered, Closed by type:$this ele-1: All FHIR elements must have a @value or children
value[x]:valueCodeableConcept	S	1..1	CodeableConcept	Result of output Binding: US Core Procedure Codes (required) ele-1: All FHIR elements must have a @value or children
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Task.status	required	SDOHCCValueSetReferralTaskStatus http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetReferralTaskStatus
Task.statusReason	extensible	SHINNYStatusReasonVS http://shinny.org/us/ny/hrsn/ValueSet/SHINNYStatusReasonVS from this IG
Task.intent	required	Fixed Value: order http://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard
Task.priority	required	RequestPriority http://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard
Task.code	example	Pattern: fulfill http://hl7.org/fhir/ValueSet/task-code from the FHIR Standard
Task.output.type	example
Task.output:PerformedActivityReference.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.value[x]:valueCodeableConcept	required	USCoreProcedureCodes http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Task	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Task	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Task	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Task	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Task	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
inv-1	error	Task	Last modified date must be greater than or equal to authored-on date. : lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn

Differential View

This structure is derived from SDOHCCTaskForReferralManagement

Name	Flags	Card.	Type	Description & Constraints
Task		0..*	SDOHCCTaskForReferralManagement	A request to fulfill an SDOH service request
id	S	1..1	id	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
meta	S	1..1	SHINNYMeta	Metadata about the resource
statusReason		0..1	CodeableConcept	Reason for current status Binding: SHINNYStatusReasonVS (extensible)
encounter	S	1..1	Reference(Encounter)	Healthcare event during which this task originated
owner		1..1	Reference(Practitioner | PractitionerRole | Organization | CareTeam | HealthcareService | Patient | Device | RelatedPerson)	Responsible individual
Documentation for this format

Terminology Bindings (Differential)

Path	Conformance	ValueSet	URI
Task.statusReason	extensible	SHINNYStatusReasonVS http://shinny.org/us/ny/hrsn/ValueSet/SHINNYStatusReasonVS from this IG

Snapshot View

Name	Flags	Card.	Type	Description & Constraints
Task	C	0..*	SDOHCCTaskForReferralManagement	A request to fulfill an SDOH service request inv-1: Last modified date must be greater than or equal to authored-on date.
id	SΣ	1..1	id	The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
meta	SΣ	1..1	SHINNYMeta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
identifier		0..*	Identifier	Task Instance Identifier
instantiatesCanonical	Σ	0..1	canonical(ActivityDefinition)	Formal definition of task
instantiatesUri	Σ	0..1	uri	Formal definition of task
basedOn	Σ	0..*	Reference(Resource)	Request fulfilled by this task
groupIdentifier	Σ	0..1	Identifier	Requisition or grouper id
Slices for partOf	Σ	0..*	Reference(Task)	Composite task Slice: Unordered, Open by profile:resolve()
partOf:SupportedPartOf	SΣ	0..*	Reference(SDOHCC Task For Referral Management)	Composite task
status	?!SΣ	1..1	code	draft | requested | received | accepted | + Binding: SDOHCC ValueSet Referral Task Status (required)
statusReason	SΣ	0..1	CodeableConcept	Reason for current status Binding: SHINNYStatusReasonVS (extensible)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system
text	SΣ	1..1	string	Plain text representation of the concept
businessStatus	Σ	0..1	CodeableConcept	E.g. "Specimen collected", "IV prepped" Binding Description (No ValueSet): (example): The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.
intent	Σ	1..1	code	order Binding: TaskIntent (required): Distinguishes whether the task is a proposal, plan or full order. Fixed Value: order
priority	S	0..1	code	routine | urgent | asap | stat Binding: RequestPriority (required): The task's priority.
code	Σ	1..1	CodeableConcept	Task Type Binding: TaskCode (example): Codes to identify what the task involves. These will typically be specific to a particular workflow. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/CodeSystem/task-code
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: fulfill
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
description	Σ	0..1	string	Human-readable explanation of task
focus	SΣ	1..1	Reference(SDOHCC ServiceRequest)	What task is acting on
for	SΣ	1..1	Reference(RelatedPerson | Group | US Core Patient Profile)	Beneficiary of the Task
encounter	SΣ	1..1	Reference(Encounter)	Healthcare event during which this task originated
executionPeriod	Σ	0..1	Period	Start and end time of execution
authoredOn	SC	1..1	dateTime	Task Creation Date
lastModified	ΣC	0..1	dateTime	Task Last Modified Date
requester	SΣ	1..1	Reference(US Core PractitionerRole Profile | US Core Organization Profile)	Who is asking for task to be done
performerType		0..*	CodeableConcept	Requested performer Binding: ProcedurePerformerRoleCodes (preferred): The type(s) of task performers allowed.
owner	SΣ	1..1	Reference(Practitioner | PractitionerRole | Organization | CareTeam | HealthcareService | Patient | Device | RelatedPerson)	Responsible individual
location	Σ	0..1	Reference(Location)	Where task occurs
reasonCode		0..1	CodeableConcept	Why task is needed Binding Description (No ValueSet): (example): Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.
reasonReference		0..1	Reference(Resource)	Why task is needed
insurance		0..*	Reference(Coverage | ClaimResponse)	Associated insurance coverage
note		0..*	Annotation	Comments made about the task
relevantHistory		0..*	Reference(Provenance)	Key events in history of the Task
restriction		0..1	BackboneElement	Constraints on fulfillment tasks
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
repetitions		0..1	positiveInt	How many times to repeat
period		0..1	Period	When fulfillment sought
recipient		0..*	Reference(Patient | Practitioner | PractitionerRole | RelatedPerson | Group | Organization)	For whom is fulfillment sought?
input		0..*	BackboneElement	Information used to perform task
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for the input Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
value[x]		1..1		Content to use in performing the task
valueBase64Binary			base64Binary
valueBoolean			boolean
valueCanonical			canonical(Any)
valueCode			code
valueDate			date
valueDateTime			dateTime
valueDecimal			decimal
valueId			id
valueInstant			instant
valueInteger			integer
valueMarkdown			markdown
valueOid			oid
valuePositiveInt			positiveInt
valueString			string
valueTime			time
valueUnsignedInt			unsignedInt
valueUri			uri
valueUrl			url
valueUuid			uuid
valueAddress			Address
valueAge			Age
valueAnnotation			Annotation
valueAttachment			Attachment
valueCodeableConcept			CodeableConcept
valueCoding			Coding
valueContactPoint			ContactPoint
valueCount			Count
valueDistance			Distance
valueDuration			Duration
valueHumanName			HumanName
valueIdentifier			Identifier
valueMoney			Money
valuePeriod			Period
valueQuantity			Quantity
valueRange			Range
valueRatio			Ratio
valueReference			Reference(Any)
valueSampledData			SampledData
valueSignature			Signature
valueTiming			Timing
valueContactDetail			ContactDetail
valueContributor			Contributor
valueDataRequirement			DataRequirement
valueExpression			Expression
valueParameterDefinition			ParameterDefinition
valueRelatedArtifact			RelatedArtifact
valueTriggerDefinition			TriggerDefinition
valueUsageContext			UsageContext
valueDosage			Dosage
valueMeta			Meta
Slices for output		0..*	BackboneElement	Information produced as part of task Slice: Unordered, Open by pattern:type, type:value
output:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
value[x]		1..1		Result of output
valueBase64Binary			base64Binary
valueBoolean			boolean
valueCanonical			canonical(Any)
valueCode			code
valueDate			date
valueDateTime			dateTime
valueDecimal			decimal
valueId			id
valueInstant			instant
valueInteger			integer
valueMarkdown			markdown
valueOid			oid
valuePositiveInt			positiveInt
valueString			string
valueTime			time
valueUnsignedInt			unsignedInt
valueUri			uri
valueUrl			url
valueUuid			uuid
valueAddress			Address
valueAge			Age
valueAnnotation			Annotation
valueAttachment			Attachment
valueCodeableConcept			CodeableConcept
valueCoding			Coding
valueContactPoint			ContactPoint
valueCount			Count
valueDistance			Distance
valueDuration			Duration
valueHumanName			HumanName
valueIdentifier			Identifier
valueMoney			Money
valuePeriod			Period
valueQuantity			Quantity
valueRange			Range
valueRatio			Ratio
valueReference			Reference(Any)
valueSampledData			SampledData
valueSignature			Signature
valueTiming			Timing
valueContactDetail			ContactDetail
valueContributor			Contributor
valueDataRequirement			DataRequirement
valueExpression			Expression
valueParameterDefinition			ParameterDefinition
valueRelatedArtifact			RelatedArtifact
valueTriggerDefinition			TriggerDefinition
valueUsageContext			UsageContext
valueDosage			Dosage
valueMeta			Meta
output:PerformedActivityReference	S	0..*	BackboneElement	Information produced as part of task
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]		1..1	Reference()	Result of output Slice: Unordered, Closed by type:$this
value[x]:valueReference	S	1..1	Reference(SDOHCC Procedure)	Result of output
output:PerformedActivityCode	S	0..*	BackboneElement	Information produced as part of task
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
type		1..1	CodeableConcept	Label for output Binding Description (No ValueSet): (example): Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/us/sdoh-clinicalcare/CodeSystem/SDOHCC-CodeSystemTemporaryCodes
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: resulting-activity
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
Slices for value[x]		1..1	CodeableConcept	Result of output Slice: Unordered, Closed by type:$this
value[x]:valueCodeableConcept	S	1..1	CodeableConcept	Result of output Binding: US Core Procedure Codes (required)
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Task.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages from the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Task.status	required	SDOHCCValueSetReferralTaskStatus http://hl7.org/fhir/us/sdoh-clinicalcare/ValueSet/SDOHCC-ValueSetReferralTaskStatus
Task.statusReason	extensible	SHINNYStatusReasonVS http://shinny.org/us/ny/hrsn/ValueSet/SHINNYStatusReasonVS from this IG
Task.businessStatus	example
Task.intent	required	Fixed Value: order http://hl7.org/fhir/ValueSet/task-intent|4.0.1 from the FHIR Standard
Task.priority	required	RequestPriority http://hl7.org/fhir/ValueSet/request-priority|4.0.1 from the FHIR Standard
Task.code	example	Pattern: fulfill http://hl7.org/fhir/ValueSet/task-code from the FHIR Standard
Task.performerType	preferred	ProcedurePerformerRoleCodes http://hl7.org/fhir/ValueSet/performer-role from the FHIR Standard
Task.reasonCode	example
Task.input.type	example
Task.output.type	example
Task.output:PerformedActivityReference.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.type	example	Pattern: resulting-activity
Task.output:PerformedActivityCode.value[x]:valueCodeableConcept	required	USCoreProcedureCodes http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Task	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Task	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Task	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Task	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Task	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
inv-1	error	Task	Last modified date must be greater than or equal to authored-on date. : lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn

This structure is derived from SDOHCCTaskForReferralManagement

Summary

Mandatory: 4 elements
Must-Support: 3 elements

Structures

This structure refers to these other structures:

• SHINNYMeta (http://shinny.org/us/ny/hrsn/StructureDefinition/SHINNYMeta)